CNC Cutting Machine Series
Loading, Deliver, Cutting & Break off the table - 4 in 1
Loading, Delivery & Cutting - 3 in 1
Loading & Cutting - 2 in 1
HOW to tell if a glass cutting machine is good or not?
Everyone wants to get a great glass cutting machine. But how to figure out if it's good?
Now, we are going to share with you some info with you and hope it helps.
Firstly, let's see the countertops
First up, let's look at the countertops:
All the countertops are made of PVC resin plate, which has high hardness, no deformation, is waterproof and oil-proof. Do not pick the foam board, as it's prone to deformation. And the density boards have drawbacks like being afraid of water and oil, high humidity, and easy deforamtion. The whole surface of our PVC resin board is processed by a processing center and is super smooth. An unprocessed countertop has poor flatness. When cutting 3mm thick glass, the glass is likely to crack. The thinnest glass our machine can cut is 2mm.
Now, moving on to the whole frame structure:
The whole frame is annealed after welding. The purpose of annealing treatment is to release the internal stress of steel welding to prevent deformation in later use and thus affecting cutting accuracy. Without annealing heat treatment, the cutting accuracy will be greatly reduced.
The supporting surface of the whole machine for installing the linear guide rail is processed, and the beam is also an annealed steel beam. If you use aluminum beams, it will lead to poor cutting accuracy and instability. The cutting accuracy of our cutting machine can be guaranteed to be ≤0.2mm.
When the machine sucks glass, it works with a telescopic arm and the machine doesn't move back and forth. We designed the linear guides on both sides to be used flat, and the linear guides used in the flat can bear even force, have a long life, and good stability. If it's used upright, only the upper side is stressed and the machine makes a lot of noise when cutting glass.
Lastly, let's look at the configurations of the main parts:
- Japan Panasonic Sensor
- German Bohle cutter head
- American Honeywell Electrical components - Relay
- Taiwan AirTAC air cylinder
- Taiwan Meanwell Power Supply
- Japan Mitsubishi PLC
- Two motor heads to drive the cutting head
- The whole machine is free to move, and the 360-degree rotation.
Parameters of the cutting machine
| Technical Parameters |
TYJT-2420 |
TYJT3628 |
| Dimensions |
3630*4700*1400mm |
3910*4700*1450mm |
| Height of the Working Table |
850mm |
850mm |
| Glass Max Processing Size |
2440*2000 |
3660*2800 |
| Cutting Thickness |
2-19mm (air pressure control) |
2-19mm (air pressure control) |
| Cutting Speed |
0-180m/min |
0-180m/min |
| Voltage & air pressure |
380V/50HZ, 0.6MPA |
380V/50HZ, 0.6MPA |
| Loading Speed |
15-40 seconds |
15-40 seconds |
| Installed Power |
11.8 KW |
11.8 KW |
| Net Weight |
3000KG |
3100KG |
Parameters of the Glass Break-off Table
| Technical Parameters |
TYJT-2420 |
TYJT3628 |
| Dimensions |
2500*2000*810mm |
2600*4020*810mm |
Details Showing
Smart Suction
After one-touch start of the glass, the machine automatically raises the boom, automatically walks and rotates to find the position and angle of the glass, and is equipped with a suction monitoring system to automatically lift the glass to the cutting table after the glass is sucked, automatically scan and cut the glass sheet.
Smart Typography
Input the glass size, the size of the glass to being cut and the cutting shape into the control panel, leaving the left work to this machine, highly improved the work efficiency and time saving.
Automatic Cutting
The cutter head is made of German Bolero head and can be rotated freely in 360 degrees to cut any shape. Computer control, automatic cutting according to optimized layout.
Air Floating Platform
The machine has an air floating system, and more than one hundred air holes are evenly arranged on the cutting table to ensure the stability of the airflow. It is very easy to push and pull the glass.
Picture Showing
CE Certifications
Our other products
We are available for any questions that you may have, please feel free to contact me!
){kind=link}
){kind=link}