Horizontal Glass Washing Machine for Low-E and Float Glass Used for Flat Glass with CE

• Customization: Available
• After-sales Service: 24-Hour Online Service
• Warranty: 1 Years
• Model NO.: TCGQ2500
• Min.Glass Size (L×w): 380*380mm
• Lifting Height: 400mm
• Glass Thickness: 3-25mm
• Speed: 0.5-12m/Min
• Power: 27kw (Drying Machine 22kw)
• Overall Size (L×w×h): 6000×3300×2700 mm
• Weight: 3500 Kg
• Brusher Roller: 3 Pairs
• Transport Package: Container
• Specification: 6000× 3300× 2700 mm
• Trademark: TOYOCC
• Origin: China
• HS Code: 842489
• Production Capacity: 10000pieces/Year

Product Description

TCGQ2500 Glass washing machine

A glass washing machine is used for flat glass washing and drying. It's necessary equipment for a glass processing enterprise. It's suitable for washing common glass, coated glass, and the LOW-E glass section. The washing and drying part can be lifted overall, have a digital display or PLC for the control option.
The machine adopts a horizontal structure, but the flat glass on the transfer roller, through the entrance part---- washing part ---- drying part (with 22kw drying machine) ---- exit part.
The glass transfer speed can reach step-less speed adjustment according to the processing requirement. And we can adjust the glass with different thicknesses by using a hand wheel and spring screw.

1. Main technical Parameter

Model	CGQ-2500 glass washing machine
Max. glass width	2500mm
Min. glass size (L×W)	380×380mm
Lifting height	400mm
glass thickness	3-25mm
speed	0.5-12m/min
Power	27Kw (drying machine 22kw)
Overall size (L×W×H)	6000×3300×2700 mm
Weight	3500 kg
brusher roller	3 pairs

2. glass washing machine main characteristic

There is stainless water sink in the entrance part. Transfer rubber covered roller can clean by itself at the revolve process; also with the sprinkler systems can wetting the glass surface before the glass enter the washing part, improve the washing effect.

The metal parts of the washing section which are in contact with water, all adopt stainless material.

The machine transmission adopts vulcanized rubber cover roller structure (prohibit acidic liquid get in touch), the maximum lift range for washing and drying parts is 400mm, in order to adapt washing different glass thickness and continence for cleaning and replacing the hairbrush.

There are three levels of washing. Equip with 3 pairs of hairbrush roller(φ150mm), which can wash the LOW-E glass, commonly coated glass, and sunshine coated glass. When washing the Low-E glass, two pairs of strong hairbrushes can raise up by the air cylinder, which will never hurt the coated surface.

Drying part, air drying system equip two pairs of air knife, the high-pressure blower can completely drying the glass surface, large lateral wind power, good air drying effect. Equip high-pressure blower 22kw, the whole blower is installed on the top of the drying part, follow the washing and drying part lifting automatically.

The machine frame and others sheet metal parts that are not touching the water, spray the senior mechanical paint after through the special technology processing. The paint with strong adhesion, bright durable surface.

3. Washing machine main spare part brand. (Some configuration brands may be replaced due to products improvement without notifying and Sunken will have the right of final explanation.)

Name	Main specification
Fan	adopt Chantong brand
water pump	adopt Guangyi brand
Stepless transmission	Adopt Xingguang brand
bearing	adopt HRE brand
Transformer, Contactor	adopt CHINT brand
Brushes	adopt Hengda brand

Machine pictures:




Factory picture: