Product Function Overview
The Single-arm Special-shaped Edging Machine (abbreviated as the special-shaped machine or single-arm machine) has diverse functions. It can grind straight edges, rounded edges, duckbill edges, and beveled edges. It can also grind round glass and oval glass. By installing a master mold on a single suction cup, the machine is capable of grinding some irregularly shaped glass pieces.
Working Principle and Processing Range
This product adopts the vacuum principle to adsorb the glass onto the suction cup. During operation, it cooperates with the motor to drive the five-star disk or the independent satellite turntable installed on a separate drive disk to rotate. With this operation mode, the machine can process special-shaped flat glass with a rotation diameter of 700 - 2100 mm or 100 - 700 mm. It is worth noting that the rotation speed of the five-star disk can be adjusted freely during work to meet different processing requirements.
Processing Operation Mode
This machine can semi-automatically grind simple-shaped special-shaped glass through the use of a cylinder. When grinding the periphery of the glass, the operator can manually replace the grinding wheel to achieve different processes such as coarse grinding, fine grinding, and polishing. When it comes to grinding the bevel of the glass, a bowl-shaped grinding wheel can be installed, and the grinding head can be tilted backward to adjust the angle of the bevel, and then the processing and grinding can be carried out.
Precision and Performance Enhancement Design
To ensure the grinding accuracy of the bevel, this machine focuses on improving the precision of the turntable. At the same time, a brake system is added to eliminate the movement gap. During the rotation process, a moderate and adjustable load will be applied, enabling the machine to maintain a gapless operation for a long time. These designs greatly reduce the vibration during grinding, effectively improving the work efficiency and the edging effect.
Technical parameters of glass shaped machine
| Glass rotation diameter |
Processing thickness |
Bevel angle |
Bevel grinding wheel |
Voltage |
Power |
Outsize |
Weight |
| 100-2100mm |
3-30mm |
0°-20° |
Ø150 |
380V 50HZ |
3KW |
1200*1200*1800mm |
1000kg |
Note: The type and quantity of equipment grinding heads can be adjusted according to customer needs, and the specific speed depends on the edging requirements and the thickness of the glass.
Overall performance requirements of glass profile edging machine
- The action of the transmission mechanism should be accurate and reliable, and there should be no obvious vibration, impact, or sliding.
- The normal working vacuum range of the sucker is -0.05~-0.1MPa.
- The cooling and air pressure system should not be blocked or leaked.
- The maximum temperature of the grinding wheel bearing part is less than 85 degrees Celsius.
- The movement accuracy of the rotating shaft of the grinding wheel, the horizontal runout is not more than 0.03mm, and the vertical runout is not more than 0.03mm.
Precautions when using special-shaped machine
1. Whether the height of the suction cup of the worktable of the special-shaped machine is consistent has a greater impact on the grinding effect. When leaving the factory, the manufacturer will self-grind the five sets of suction cup holders, and select the suction cup glue with the same thickness to keep the height of each suction cup consistent. Therefore, do not disassemble and assemble the suction cup under normal circumstances. If the suction cup glue is damaged, you should choose the same thickness for replacement.
2. After the vacuum pump of the special-shaped machine is used for a period of time, the vacuum degree will drop (that is, the suction power will drop) due to water intake and other reasons, so pay attention to check and troubleshoot, otherwise, the machine will work under insufficient suction, which will affect Grinding quality, on the other hand, is also prone to safety accidents.
3. When grinding the glass, make sure that the nozzle of the universal water pipe is facing the grinding wheel instead of dry grinding. At the same time, the machine should be cleaned regularly.
How to operate the glass profile machine
Select the corresponding bevel grinding wheel according to the requirements of the bevel, and then adjust the distance between the grinding wheel and the glass surface according to the thickness of the glass, and then force the grinding wheel against the glass for edging.
Recommended grinding wheel configuration:
1) For processing straight-line straight-edge glass, one medium mesh diamond wheel is generally used, such as 180 mesh diamond wheel and 1 BD polishing wheel
(2) For round glass, one medium-sized diamond wheel is generally used, such as 180-mesh diamond wheel and 1 BD polishing wheel
(3) For processing duckbill glass, generally one 100 mesh diamond wheel, one 240 mesh rough grinding diamond wheel and 1 BD polishing wheel are used
(4) For processing beveled edges, such as mirrors, generally one 100 mesh diamond wheel, one 240 mesh rough grinding diamond wheel, one 3-color resin wheel and one wool polishing wheel are generally used.
Maintenance of the machine
1. There must be sufficient pressure of cooling water during grinding to ensure the efficiency of grinding and the service life of the grinding wheel.
2. If the speed drops suddenly during use, reduce the pressure of the mill and try not to overload it, otherwise the motor will be easily damaged.
3. All glass residues on the equipment must be cleaned up after work every day. Be careful not to touch it with your hands, but directly rinse with water.
4. Add lubricant to the equipment every half month.
5. To prevent freezing damage to the water pipe in winter, the cooling water in the water pipe must be drained after the work is finished every day.
6. Keep the vacuum pump oil at the specified line at all times.
Our company is constantly committed to the development of new products, and at the same time pays attention to the after-sales service of the products. We have successively established our own sales points throughout the country and established a complete after-sales service network to fully guarantee the pre-sales, in-sales and after-sales of our customers. The service allows customers to buy with confidence and satisfaction. Our products sell well at home and abroad, and are favored by people from all walks of life.
Introduction of Glass Drilling Machine
The glass drilling machine adopts automatic control design, pneumatic clamping glass, feed oil pressure buffer technology, free adjustment of the automatic drilling time and speed of the upper and lower drills, the upper and lower drills nest and drill successively. The working table adopts pneumatic lifting, equipped with movable positioning and automatic material receiving device, which can quickly and accurately locate the batch processed glass workpieces. The product is divided into automatic and manual options.
1. Pay attention to safety during debugging and use, and do not touch the moving parts and power parts of the machine when the machine is started.
2. Do not place tools and other objects on the conveyor rail and cover of the machine
3. In an emergency, you should immediately press the "Emergency Stop" button or pull down the power-off switch
4. Keep the water tank with sufficient cooling water and clean water at all times to avoid burning the grinding wheel and glass, and timely clean up the grinding impurities in the water inlet and outlet pipes to keep the water circulation unblocked
5. Before each drilling work, check whether all switches work normally and whether the control direction is correct. If it is incorrect or the control direction is wrong, stop the machine for inspection immediately, otherwise it will cause serious damage to the machine
6. The operating temperature of the motor should be less than or equal to the ambient temperature +50°C.
Products done by the drilling machine
The main technical parameters
| 1. Drilling diameter: ø4-ø220mm |
2. Height of the Worktable: 850mm/1000mm |
| 3. Thickness of the glass: 3mm-20mm |
4. Min size of processed glass φ100*100mm |
| 5. Maximum size of processed glass:2600mm*2400mm/2600mm*1800mm |
6. Distance between center of drill shaft and column:1257mm |
| 7. Weight:1000kg |
8. Power: 380V/50HZ/3-Phase |
Technical description of drilling machine structure
1. Glass pressing mechanism: It is used to press the glass to facilitate drilling and nesting.
2. Upper drill bit operating mechanism: Operate the upper drill bit for manual drilling and manual drilling and nesting.
3. Speed adjustment and belt tensioning mechanism: used to adjust the speed of the upper and lower drill shafts and the adjustment of belt feeding.
4. Electrical control box and operation panel; used to control and operate the machine for work.
5. Floating table: used as an auxiliary support for the workpiece when processing large workpieces. When the size of the processed part is not large, it is not necessary to install this part.
6. Cooling system: cooling water is used to cool the upper and lower drill bits.
7. Pneumatic system: Provide power for clamping mechanism, material receiving mechanism, lower drill bit feed and floating table movement.
8. Material receiving mechanism: used to receive and store the drilled material core.
Packing List
| No |
Item |
Unit |
Quantity |
| 1 |
Main Engine |
pc |
1 |
| 2 |
Water Tank |
pc |
1 |
| 3 |
Working Platform |
pc |
1 |
| 4 |
Motor |
pc |
2 |
| 5 |
Water Pump |
pc |
1 |
| 6 |
Operation Manual |
pc |
1 |
Our mission is to provide "excellent price with the same quality, and the same price with high quality".
Introduction of Qingdao TOYOCC Industry Co., Ltd
- Company Establishment Background
- Founding Time and Funding Source
- Qingdao TOYOCC Industry Co., Ltd was jointly funded by two leading companies in the metal equipment industry in 2017.
- Company Business Direction
- Focus Area
- We focus on developing the international market and business.
- Company Strength and Heritage
- Rich Experience
- Our parent companies have more than 20 years of experience in the manufacturing industry, covering long-term international foundry production.
- Scale and Talent
- Our factories cover an area of 128,608 square meters, with 500 technical staff and 60 R&D engineers, demonstrating strong production and R&D capabilities.
- Company Certification Situation
- Authoritative Certifications
- Our factories have obtained TS16949, ISO9001 international quality system certifications, Germany CE certification, and ISO14001, T28001 management system certifications.
- Company Product Innovation
- Advanced Production and Patented Products
- The factories own world-class production lines and imported molds, and have introduced a variety of patented products to the market.
- Company Development Concept
- Development Goals
- Relying on the manufacturing capabilities of our parent companies, we are committed to expanding international cooperation and promoting the concepts of "Made in China" and "Created in China".
- Serving the Globe
- We provide high-quality products and services for factories, traders, and direct users around the world.
- Cooperation Credo
- Our credo is "excellent price with the same quality, and higher quality with the same price". With this in mind, we seek win-win cooperation with our partners.
- Company Business Expansion
- Global Recruitment
- Currently, we are seeking first-tier agents worldwide, expanding bilateral import and export business, and developing cross-border e-commerce.
- Cooperation Invitation
- We warmly welcome product users, distributors, and platform websites to work together and achieve mutual win-win results.
FAQ
1. What is your standard lead time for orders?
A: For standard models and quantities within our stock range, delivery usually takes 7-15 working days after receiving the deposit. For large-volume or customized orders, the lead time is typically 25-35 days depending on the production schedule. For urgent orders, please contact us directly - we'll prioritize your request if possible.
2. Can I customize the product according to my needs?
A: Absolutely! We provide a full range of customization services, including:
- Logo branding
- Product structure modification
- Color or material adjustments
- Custom packaging
Our engineering team will create a tailored plan based on your requirements.
3. How do you ensure product quality?
A: We implement ISO9001 and CE quality systems. Products go through multiple inspections, including functionality, safety, and durability tests. Final quality checks, photos, and videos are provided before delivery.
4. What after-sales support do you provide?
A:
- 12-month product warranty
- Free spare parts during warranty
- Online technical support
- Video or on-site installation and maintenance support upon request
5. Which payment methods are accepted?
A:
- T/T (Telegraphic Transfer)
- L/C at sight
- Credit Card, PayPal, Western Union (for samples or small orders)
6. Can I track my order during shipping?
A: Yes. We'll provide a tracking number and real-time tracking link once the goods are shipped.
7. Do you provide OEM or ODM service?
A: Yes, we offer full OEM & ODM services. Whether you need custom branding or exclusive designs, we can help develop and manufacture according to your needs.
8. Do you offer product training or manuals?
A: Yes. We provide:
- English manuals
- Online video tutorials
- Live video training
- On-site technician support for larger projects (if needed)
9. How do I get a quotation or more information?
A: Please contact our sales team and provide:
- Product model or usage
- Quantity
Destination port
Waiting for your inquiry!
Don't hesitate to contact me for any questions you have!
Audited Supplier 
){kind=link}