Insulating Glass Production Line

• Warranty: 12 Months
• Type: Insulating Glass Production Line
• Certification: CE
• Model NO.: AC380v 50Hz

Product Description

Insulating Glass Production Line 

1.Voltage: AC380v 50Hz
2.Power: 38kw
3.Max.size: 2500×3600mm
4.Min.size: 500×300mm
5.Glass thickness: 3-15mm
6.IG thickness: 10-48mm
7.Transport speed: 8-45m/min
8.The suction of sucker: 6kg/pcs
9.Gas Filling time: 3-5 s(1000mm×1000mm)
10.Air compressor: 0.8m³/ min
11.Air pressure: 0.6--0.8Mpa
12.Overall dimension: 26000×1800×3600mm

The detailed specification of LBW2500PB
Vertical Automatic Insulating Glass Outside

Assembly Flat Press Production Line



All machines are proved by CE &SGS certification
 

adopt PLC control the working condition, this production line can produce Low-e

glass, double glazing, triple glazing. Which include 7 sections, that is feeding section.,

washing and drying section, storage section, light inspection section and spacer bar

put section, outside assembly section, press and inside assembly section ,output

section.

Feeding section

The glass panels are made of high density board which can resist the moisture. The transmission wheels are made of polyurethane which can resist abrasion and corrosion. And the transmission wheels can be used with both sides. So it can save the material cost.

There is one low-e coating checking system, if you put glass on the wrong side, it will give an alarm.

Washing and drying section

This section is made of stainless steel which can avoid rust and prolong the machine service life.

Three pairs of brushes high temperature nylons, they are soft and can avoid scratching glasses. Six pieces soft brushes It can wash low -E glass Diameter 0.1mm nylon; High temperature brushes for regular glass; 0.07mm for low-e glass.

Air Knife

The air knife is designed rhombic shape and produced by CNC bending, so it can strengthen the wind power and make the drying effect to arrive the best level. At the bottom, Sweden SKF oil-free lubrication water-proof bearings are adopted and avoid second pollution.

The air cylinder controls the movement of airknife, and it can open and close

3-19mm glass thickness;  On the back, the three-level water tank is equipped with three water pump, water

heating device and water filtering system, guarantee the temperature and cleanness.

The high-pressure blower with heating device can produce circulating hot air which make drying effect reach best condition. Besides, all bearing foundations in the washing section are made of copper, aluminum or stainless steel which can resist rust and anti-oxidation.

Light inspection and aluminum spacer bar installation section


 

This section is used to inspect the washing and drying quality of the glass. The lights are put perpendicularly with the glass and the back board is painted black. It is easy to check the washing and drying effect . Aluminum frame positioning device can make our operator putting aluminum frame with high precise, besides it is easy to operate.
 

This section was our new design ,it can improve efficiency than assembly inside,especially to avoide the malposition questions between two or three glasses. 

The sensor can easily know the glass position and stop at right place when glass coming from the light and aluminum bar installation section.

Press and inside assembly section

 

At this section, all the data will be inputted into interface screen in advance.  The soft and moistureproof plate inside, and our press board can be open 450mm for maintenance. At this section, all the data will be inputted into interface screen in advance. 2 At this section, all the data will be inputted into interface screen in advance.