TCGQ2500 Glass washing machine
A glass washing machine is used for flat glass washing and drying. It's necessary equipment for a glass processing enterprise. It's suitable for washing common glass, coated glass, and the LOW-E glass section. The washing and drying part can be lifted overall, have a digital display or PLC for the control option.
The machine adopts a horizontal structure, but the flat glass on the transfer roller, through the entrance part---- washing part ---- drying part (with 22kw drying machine) ---- exit part.
The glass transfer speed can reach step-less speed adjustment according to the processing requirement. And we can adjust the glass with different thicknesses by using a hand wheel and spring screw.
1. Main technical Parameter
| Model |
CGQ-2500 glass washing machine |
| Max. glass width |
2500mm |
| Min. glass size (L×W) |
380×380mm |
| Lifting height |
400mm |
| glass thickness |
3-25mm |
| speed |
0.5-12m/min |
| Power |
27Kw (drying machine 22kw) |
| Overall size (L×W×H) |
6000×3300×2700 mm |
| Weight |
3500 kg |
| brusher roller |
3 pairs |
2. glass washing machine main characteristic
| There is stainless water sink in the entrance part. Transfer rubber covered roller can clean by itself at the revolve process; also with the sprinkler systems can wetting the glass surface before the glass enter the washing part, improve the washing effect. |
| The metal parts of the washing section which are in contact with water, all adopt stainless material. |
| The machine transmission adopts vulcanized rubber cover roller structure (prohibit acidic liquid get in touch), the maximum lift range for washing and drying parts is 400mm, in order to adapt washing different glass thickness and continence for cleaning and replacing the hairbrush. |
| There are three levels of washing. Equip with 3 pairs of hairbrush roller(φ150mm), which can wash the LOW-E glass, commonly coated glass, and sunshine coated glass. When washing the Low-E glass, two pairs of strong hairbrushes can raise up by the air cylinder, which will never hurt the coated surface. |
| Drying part, air drying system equip two pairs of air knife, the high-pressure blower can completely drying the glass surface, large lateral wind power, good air drying effect. Equip high-pressure blower 22kw, the whole blower is installed on the top of the drying part, follow the washing and drying part lifting automatically. |
| The machine frame and others sheet metal parts that are not touching the water, spray the senior mechanical paint after through the special technology processing. The paint with strong adhesion, bright durable surface. |
3. Washing machine main spare part brand. (Some configuration brands may be replaced due to products improvement without notifying and Sunken will have the right of final explanation.)
| Name |
Main specification |
| Fan |
adopt Chantong brand |
| water pump |
adopt Guangyi brand |
| Stepless transmission |
Adopt Xingguang brand |
| bearing |
adopt HRE brand |
| Transformer, Contactor |
adopt CHINT brand |
| Brushes |
adopt Hengda brand |
Machine pictures:
Factory picture:
Audited Supplier 
){kind=link}
){kind=link}