CNC Automatic Glass Cutting Production Line with Loading, Transfering, Breaking for Glass Manufacturing and Processing

• After-sales Service: Life Time
• Warranty: 30 Years
• Application: Glass
• Process Usage: CNC Non-Conventional Machine Tools
• Movement Method: Contour Control
• Control Method: Open-Loop Control
• Model NO.: JT3628
• Numerical Control: CNC/MNC
• Processing Precision: 0.03~0.04(mm)
• Performance Classification: Economical CNC Machine Tools
• Certification: CE
• Condition: New

Product Description

                                                                                         CNC CUTTING MACHINE

The automatic glass cutting all-in-one machine absorbs a single piece of glass through a suction cup, carries large and thick pieces of glass which are placed approximately vertically on a glass shelf, and then converts the glass to a horizontal state by mechanical transmission, and then uses a cutting system to cut it. It solves the current situation of difficult, unsafe, large cutting errors and low production efficiency which are caused by the large and thick pieces of glasses.


The machine is simple and safe to operate, features fast have high processing accuracy, and is labor-saving. The control system of the loading mechanism is controlled by a microcomputer (PLC programmable controller), and the cutting system adopts a CNC numerical control operating system to make the entire control system reliable, simple, and high automation.


The machine can walk in the workshop and rotate 360 degrees. The machine automatically locates the angle and position of the glass and integrates linear cutting and heterosexual cutting. From the film loading to the cutting, it is fully controlled. The equipment adopts the latest generation control system, which truly realizes the linkage between the equipment and the computer, with high accuracy and fast speed. The cutting machine has a series of latest functions such as automatic laser positioning and graphic scanning. The glass is automatically typeset and the profile is scanned automatically, thereby eliminating manual CAD measurement and drawing. The machine uses high-performance motors and gear racks to ensure the stability of the machine itself. The cutter wheel is imported from Germany with a high hardness cutter wheel. The cutter head is equipped with a protection device to effectively prevent the cutter from colliding. The machine can be equipped with an automatic labeling function and cymbal table to achieve assembly line operation.


 

Features
 

• The sensor is from Panasonic Japan
• German Bohle cutter head
• Electrical components - Relay is American Honeywell
• Two motorheads to drive the cutting head
• The whole machine is free to move and 360-degree rotate
• The suction cup has an insufficient vacuum alarm device

 

Parameters of the cutting machine

 

Technical Parameters	TYJT-2420	TYJT3628
Dimensions	3630*4700*1400mm	3930*700*1400mm
Height of the Working Table	850mm	850mm
Glass Max Processing Size	2440*2000	3660*2800
Cutting Thickness	3-19mm (air pressure control)	3-19mm (air pressure control)
Cutting Speed	0-180m/min	0-180m/min
Voltage & air pressure	380V/50HZ, 0.6MPA	380V/50HZ, 0.6MPA
Loading Speed	15-40 seconds	15-40 seconds
Installed Power	11.8 KW	11.8 KW
Net Weight	3000KG	3100KG

Parameters of the glass break off the table
 

Technical Parameters	TYJT-2420	TYJT3628
Dimensions	2500*2000mm	3800*2900